Precision Engineering, Layer by Layer.
Every product we manufacture passes through a meticulously integrated production stack - from AI-driven design validation to cryptographic component traceability - with machine intelligence embedded at every layer.
Building Your Product, Layer by Layer.
Each floor of Shematic's 5-story manufacturing facility corresponds to a distinct production phase. Every layer adds precision, intelligence, and quality assurance - culminating in a zero-defect finished product with end-to-end cryptographic traceability.
Level 01Automation & Smart SystemsDESIGN VALIDATION
Automated neural DFM and schematic rule validation instantly flag footprint conflicts, component obsolescence, and thermal hotspots.
Inspect LayerHide Breakdown
DESIGN VALIDATION
Automated neural DFM and schematic rule validation instantly flag footprint conflicts, component obsolescence, and thermal hotspots.
Neural parsers process Gerber ODB++ and BOM data in < 60 seconds, catching lifecycle EOL/NRND flags, impedance violations, and HDI routing conflicts.
- HDI stack-up verification
- Impedance control ±5%
- Any-layer interconnect DRC checks
- Signal integrity pre-simulation
Level 02Supply Chain IntelligenceMATERIALS & SUPPLY CHAIN
Neural supply chain algorithms audit tier-1 distributor feeds in real time, verifying component authenticity and reel-level traceability.
Inspect LayerHide Breakdown
MATERIALS & SUPPLY CHAIN
Neural supply chain algorithms audit tier-1 distributor feeds in real time, verifying component authenticity and reel-level traceability.
GNN sourcing agents monitor 200+ supplier feeds (Digi-Key, Mouser, Arrow, regional distributors), auto-trigger reorders at safety stock thresholds, and flag counterfeit risk with authenticity scoring.
- J-STD-033 MSD floor-life countdown timers
- 2D DataMatrix reel serialization at intake
- Real-time EOL/NRND obsolescence alerts
Level 03IoT ConnectivityPROCESS ENGINEERING
Closed-loop digital twin modeling dynamically tunes manufacturing parameters to guarantee zero-drift process repeatability.
Inspect LayerHide Breakdown
PROCESS ENGINEERING
Closed-loop digital twin modeling dynamically tunes manufacturing parameters to guarantee zero-drift process repeatability.
Physics-Informed Neural Networks (PINN) model thermal gradients across every board variant, auto-correcting SPI paste volume and reflow oven profiles in real time.
- Closed-loop SPI paste volume correction
- IPC-7095 Class 3 solder void minimization
- ±0.2°C thermal drift variance
Level 04Cloud & Data IntegrationEQUIPMENT & AUTOMATION
Autonomous cyber-physical robotics with real-time IoT edge telemetry, self-calibrating toolheads, and predictive machine health models.
Inspect LayerHide Breakdown
EQUIPMENT & AUTOMATION
Autonomous cyber-physical robotics with real-time IoT edge telemetry, self-calibrating toolheads, and predictive machine health models.
LSTM anomaly models analyze nozzle vacuum telemetry, vibration signatures, and motor power consumption to predict maintenance needs well ahead of failure, enabling proactive intervention before line stoppages occur.
- ±15μm fine-pitch placement tolerance
- Real-time optical nozzle alignment
- Automated tool-wear drift compensation
- 100k CPH placement rate
Level 05Real-time AnalyticsHUMAN + AI OVERSIGHT
Supervisory human-in-the-loop orchestration where computer-vision co-pilots augment expert engineers for proactive root-cause prevention.
Inspect LayerHide Breakdown
HUMAN + AI OVERSIGHT
Supervisory human-in-the-loop orchestration where computer-vision co-pilots augment expert engineers for proactive root-cause prevention.
Bayesian active-learning models flag uncertain defect classifications for expert review, accelerating decision velocity 10× while substantially reducing false-negative escape rates toward near-zero.
- 120 FPS multi-angle 3D AOI defect triage
- Automated ECO (Engineering Change Order) parsing
- Real-time SPC control chart monitoring
Level 06AI / ML IntelligencePRODUCTS & TRACEABILITY
Zero-defect finished electronics validated through automated functional stress testing, environmental burn-in, and full cryptographic traceability.
Inspect LayerHide Breakdown
PRODUCTS & TRACEABILITY
Zero-defect finished electronics validated through automated functional stress testing, environmental burn-in, and full cryptographic traceability.
Every finished board receives a cryptographically signed digital twin record linking reel lot codes, solder batch IDs, reflow profile snapshots, placement machine IDs, and test results to a unique board serial number.
- Environmental burn-in + functional stress testing
- IPC-A-610 Class 3 final inspection
- Full wafer-to-chassis component genealogy
- Export-ready compliance documentation
Manufacturing Capabilities.
Our production lines are equipped for the most demanding high-density, high-reliability PCB assemblies - from single-layer prototypes to complex multi-layer HDI production boards.
Assembly Technologies
- SMT (Surface Mount Technology)
- Through-Hole (PTH/THT) Assembly
- BGA & µBGA Placement
- Mixed Technology (SMT + THT)
- Selective Soldering
- Conformal Coating (Acrylic/Silicone/Urethane)
- Flip Chip & COB Assembly
- Fine-Pitch QFN & CSP Handling
Inspection & Testing
- 3D Automated Optical Inspection (AOI)
- Solder Paste Inspection (3D SPI)
- 2D/3D X-Ray BGA Inspection
- In-Circuit Testing (ICT)
- Functional Testing & Burn-In
- Flying Probe Testing
- Environmental Stress Screening (ESS)
- Boundary Scan / JTAG Testing
Certifications & Standards
- IPC-A-610 Class 2 & 3
- ISO 9001:2015 (Active & Certified)
- ISO 14001:2015 (Active & Certified)
- IATF 16949 (Automotive Electronics)
- RoHS & REACH Compliance
- UL / CE / FCC
- IEC 62368 (Chargers / Power)
- J-STD-001 Soldering Standard
- CTO / UPPCB Environmental Clearance
PCB Specifications
- Layers: 1 to 18+
- Min. Trace / Space: 3/3 mil
- Board Thickness: 0.4mm - 6mm
- Materials: FR4, Rogers, Metal Core, Flex/Rigid-Flex
- HDI & Any-Layer Interconnect
- Impedance Control ±5%
- Via Types: PTH, Blind, Buried, Micro
- Aspect Ratio: Up to 12:1
Production Speed & Scale
- Prototype Turnaround: < 48 hrs
- Component Placement: 100k CPH
- Reflow Profiling: AI-optimized PINN
- NPI to Mass Production: 2 weeks
- Demand Scaling: +300% surge-ready
- 24/7 Lights-Out Night Operation
- Changeover Time: < 30 min (AI-assisted)
- Simultaneous Product Lines: 2-3 SMT + 7-12 FATP
Supply Chain Intelligence
- 200+ vetted component suppliers
- AI-driven demand forecasting (GNN)
- JIT & Kanban inventory models
- Real-time shortage monitoring
- Bonded inventory programs
- Global fulfillment partnerships
- Counterfeit component detection
- Lifecycle EOL/NRND monitoring
Firmware & Software Integration
- In-system firmware flashing & verification
- JTAG / SWD / UART programming
- Bootloader customization & lockdown
- OTA update readiness validation
- Cryptographic key provisioning
- Device identity (UUID) serialization
- Production test script development
- Embedded debug & regression testing
Mechanical & Box Build
- Enclosure sub-assembly & fit-check
- Press-fit connector insertion
- Torque-controlled fastener assembly
- Custom label printing & application
- Cabling harness & wire management
- Foam-insert custom packaging design
- Pallet & export tray engineering
- Barcode & QR traceability labelling
Which Capabilities Apply to Your Sector.
Different industries demand different certification and process rigor. This matrix maps Shematic's core capabilities to the verticals we serve.
| Capability | Consumer | Defense | Automotive | Medical | IoT | Telecom |
|---|---|---|---|---|---|---|
| IPC-A-610 Class 3 | - | ✓ | ✓ | ✓ | - | ✓ |
| X-Ray BGA Inspection | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Conformal Coating | - | ✓ | ✓ | ✓ | - | - |
| 100% Component Traceability | - | ✓ | ✓ | ✓ | - | ✓ |
| Functional + Burn-In Test | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| IATF 16949-aligned Process | ✕ | ✕ | ✓ | ✕ | ✕ | ✕ |
| ISO 13485-aligned Process | ✕ | ✕ | ✕ | ✓ | ✕ | ✕ |
| Firmware Flashing & Provisioning | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Lights-Out Night Production | ✓ | - | ✓ | ✕ | ✓ | ✓ |
| Box Build & System Integration | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Verify Our Capabilities for Your Product.
Share your project requirements. Our engineering team will assess DFM readiness, identify the right production line, and return a technical evaluation within 2 hours.